Rustixs.com

This was a quick project that I finally finished. I had the oyster shell sitting around for a couple of years and had planned making this since I found it in my travels. The wood was a leftover from a king-size bed I built for a friend out of Indiana poplar.

I love that wood! It has so much character and interest, in its coloring,  the grain and from the insects that had a party there during storage.

Anyone could make this with limited tools. You would need a handsaw or scrap wood already the size you wanted  for the mounting plate, a drill, a shell, sandpaper, three screws, some epoxy, and wood finish.

The limiting steps in this are drilling the whole in the shell—I used a Dremel tool—but an electric drill and some patience will do the trick. The drill bit will get hot—pause periodically to let it cool.

Try to find a shell of sufficient length with a flattened edge that will sit flush against the mounting plate. You can sand this flat edge to make it more even. Depending on the shell, you may want to sand the edges a bit to take some of the sharpness down or get rid of barnacles. The shell is calcium carbonate—the smell may remind you of the dentist.

Shaping the mounting plate took some patience too, but that is the beauty of woodworking.  Once it is shaped just like you like it, place the shell, measure and mark the spots for the two mounting screws and the through the shell screw. Drill pilot holes for the mounting and through screws and  countersinks for the mounting screws.

You can finish the mounting plate with about anything you want. Paint it if the wood is not all that interesting or use a stain or  a natural finish. I used some left over teak oil to penetrate the wood and then followed it up with a coat of paste wax applied with a steel wool pad. I think this is a supremely natural, but protective finish.

Make sure you choose a screw to mount the shell that is not so long it will stick out the other side of the mounting plate. Secure the shell with a small amount of epoxy, like JB Weld, and a wood screw.  Be careful not to over tighten and crack the shell. Let this dry overnight.

That is it. It is ready to mount wherever you choose. I used some self-drilling dry wall anchors . If you would like some measurements, let me know and I will post them. But really it is up to you. If you have more than one shell, you could mount them in a series on a wider piece of wood.

If you are looking for a project plan for a chair, bench, wall organizer, bed, or cabinet, check out Southern Living project plans. The archive includes plans for indoor and outdoor furniture. Each plan contains a materials list, cutting list, measured drawing, and build instructions. The plans are rated for degree of difficulty to help you decide if you are up to the task.

My particular favorites are the Adirondack chair, Outdoor Daybed, and the Picnic Table (which I think is cool for indoors, too).

Plans can be ordered for $4 and are delivered as a pdf via email.

Finally, I took the time to write down/draw the plan I used to make birdhouses that I posted here some time ago. I made another house from standard pine lumber leftovers and made this drawing. It is based on 3/4″ thick lumber, so you may have to adjust if you use something thicker or thinner. One thing absent from the drawing is a 6″ x 1 1/2″ piece of aluminum flashing that I nailed to the top of the roof to cover the gap between the sides of the roof.

I used pine this time, but I prefer using cedar or something more weather resistant. If you use pine, paint or stain it the exterior with a good exterior oil-based enamel or penetrating oil–preferably a penetrating oil. If you can use cedar, then no finish is necessary.

Unfortunately, I gave the birdhouse away as a gift before I remembered to take a picture of it. But it was similar to these.
Download birdhouse plan

Kelly sent me pictures of the ‘Coastal Oak’ (that is what I am calling that style/design) table in her home with the chairs and rug. I love it and she is pleased. Here is what she said:

The table looks absolutely wonderful. As you will see in my pictures my dogs love to be in front of the camera. It turned out perfect and just like I had hoped. Thank you very much! The “S” household is extremely pleased.

I had not see the legs on these chairs before. They have a cool rustic character that adds to the whole look. I think the rug and the seagrass chairs are a cool contrast to the various colors/features of the salvaged oak timbers. I am not sure where the rug came from but I think the chairs are from Pier 1.

Update from Kelly: BTW…the chairs are from Pier 1 and the rug came from West Elm. I really tried to put some thought to the look and it all came together as I had hoped.

All that remains is a bit of hardware and wrapping it up for shipping. It is beautiful! The oil has soaked in very nicely.

I put a coat of penetrating oil on the underside of the table top halves.

This is the underside and therefore not finished sanded and more rough than the top side but the color is beautiful. I can’t wait to see what the top looks like. Below is a picture of the legs with one coat of oil.

It is just gorgeous. I love the nail scars, the knots, the wormwood, and the grain. This thing is solid and should serve for years and years.

Kelly’s table is coming along and will shortly be finished–literally. Below is a picture of it unfinished and assembled. The band clamps are there to hold the two halves of the top together so I can mark the spots for the alignment pins and other hardware. That should be done tomorrow. Then what remains is a final sanding and a few coats of oil finish.

Progress continues on Kelly’s dining table. The two halves of the top have been rough sanded and the table base is almost complete.

Remaining steps include fitting the two halves using alignment pins, placing the attachment points for the two halves, finish sanding all the parts, and application of the penetrating oil finish. Then it will be heavily bubble wrapped and packaged for shipping by Fed Ex. If the weather cooperates, I hope to do this my next weekend or shortly thereafter. It looks good and is solidly built. I made a couple improvements to the design since the initial table was built. I hope Kelly likes it when it is in her home. She has picked some fabulous chairs from Pier 1 that will complement the rustic nature of the piece and add some style and class to the dining set.