September 1st, 2008
I ran across this cool use of natural stones for cabinet hardware. The company, Montana Stones, uses natural stones, available in multiple colors, to make cabinet knobs, drawer pulls, robe knobs, and bottle stoppers. It is a neat idea that makes use of a natural material in an alternative way. The slightly polished stones are pretty, but it is a bit strange to me that the stones are polished at all. I would prefer a natural unpolished, unfinished look that maximizes the nature of these beautiful stones. Also, there is a bit of a dichotomy in the drawer pull construction in that the base is very manufactured and polished. Again, I would rather have seen a more rustic base for these pieces.
But they are very nicely made and would compliment a new kitchen installation or a more modern style of furniture.
Tags: hardware, natural, stone
Posted in furniture | No Comments »
March 30th, 2008
Kelly sent me pictures of the ‘Coastal Oak’ (that is what I am calling that style/design) table in her home with the chairs and rug. I love it and she is pleased. Here is what she said:
The table looks absolutely wonderful. As you will see in my pictures my dogs love to be in front of the camera. It turned out perfect and just like I had hoped. Thank you very much! The “S” household is extremely pleased.
I had not see the legs on these chairs before. They have a cool rustic character that adds to the whole look. I think the rug and the seagrass chairs are a cool contrast to the various colors/features of the salvaged oak timbers. I am not sure where the rug came from but I think the chairs are from Pier 1.
Update from Kelly: BTW…the chairs are from Pier 1 and the rug came from West Elm. I really tried to put some thought to the look and it all came together as I had hoped.


Posted in All, furniture | 5 Comments »
March 27th, 2008
Last week I bubble wrapped each piece of the table within an inch of its life and then loaded it all in my truck and carried it to the local mailing/shipping shop. The guys at Parcels Too in Trussville were great! They figured out a way to get it to Kelly S. within budget and further wrapped and boxed it up very professionally. The folks at Roadway got to Kelly’s on Tuesday (we had a tracking number so we could watch it travel from here to there) and she was successful in getting it into her house–even if they Roadway guy didn’t think they could do it themselves. I bet she has a pile of packing material–I really hope she can find a use for it rather than just throwing it away. Reuse, recycle, renew.
She is going to send me a picture with the chairs she chose (from Pier 1) and I will post that here when I get it. I think it is going to great with the chairs.
Posted in All, furniture | No Comments »
March 10th, 2008
All that remains is a bit of hardware and wrapping it up for shipping. It is beautiful! The oil has soaked in very nicely.

Posted in All, furniture, projects | 2 Comments »
March 3rd, 2008
I put a coat of penetrating oil on the underside of the table top halves.

This is the underside and therefore not finished sanded and more rough than the top side but the color is beautiful. I can’t wait to see what the top looks like. Below is a picture of the legs with one coat of oil.

It is just gorgeous. I love the nail scars, the knots, the wormwood, and the grain. This thing is solid and should serve for years and years.
Posted in All, furniture, projects | No Comments »
March 1st, 2008
Kelly’s table is coming along and will shortly be finished–literally. Below is a picture of it unfinished and assembled. The band clamps are there to hold the two halves of the top together so I can mark the spots for the alignment pins and other hardware. That should be done tomorrow. Then what remains is a final sanding and a few coats of oil finish.

Posted in All, furniture, projects | No Comments »
February 24th, 2008
Progress continues on Kelly’s dining table. The two halves of the top have been rough sanded and the table base is almost complete.

Remaining steps include fitting the two halves using alignment pins, placing the attachment points for the two halves, finish sanding all the parts, and application of the penetrating oil finish. Then it will be heavily bubble wrapped and packaged for shipping by Fed Ex. If the weather cooperates, I hope to do this my next weekend or shortly thereafter. It looks good and is solidly built. I made a couple improvements to the design since the initial table was built. I hope Kelly likes it when it is in her home. She has picked some fabulous chairs from Pier 1 that will complement the rustic nature of the piece and add some style and class to the dining set.
Posted in furniture, projects | No Comments »
February 22nd, 2008
I can really see how my limited skill as a potter has improved. Of course, I had no where to go but up. I don’t know how it happened but I was able to make some nice bowls that I can actually use as serving pieces. I also made a small plate on the wheel–I am told that plates are difficult. There were so many talented people in my class who made much more difficult pieces, but I am very pleased with the loot I brought home. I love the blue glaze and the red also turned out very rich. I tried some spotting for artistic effect with a white glaze and I kind of like it too.


Posted in All, pottery | No Comments »
February 22nd, 2008
I finished my latest round of classes at Cahaba Clayworks. Just to finish up my last round, I found my “experiments in shaping” that had been bisque fired and finished them up. I do not know exactly what these might be used for but I think they might have a function as a pencil holder or as a weird flower vase.

This is a lovely glaze called varigated blue. I used it a lot on the finished pieces from this last go round.
Posted in All, pottery | No Comments »
February 17th, 2008
It is beginning to look like a dining table, or at least the parts of a dining table. There is only one piece of the 5 left to be assembled–the center crosspiece. I have done the math and plan to cut and assemble it tomorrow. Believe it or not, the trigonometry/geometry I learned years ago does come in handy at times. I used the good old Pythagorean theorum to figure out the lengths of the pieces I will need to form the crossed members of the center support.
This picture shows the underside of one of the top halves. I added some thin strips to the underside. The glue has to be removed and it needs a final sand.

Here are the leg supports. They need some hand sanding to remove glue residue but otherwise these are ready to be assembled to the crosspiece when it is finished.

Posted in All, furniture, projects | No Comments »